Model No.: 1"-24"
Place of Origin: Hebei Mengcun
Supply Ability: 100T/Time
Socket is the connection between pipe and pipe tools, can tear open outfit of the connection point between components and pipeline.Plays an indispensable role in the pipe, it is one of the two main components of the hydraulic pipes.
Has various types of pipe joint, the commonly used pipe joint in general can be divided into two kinds of hard pipe and hose connection.If, in accordance with the pipe and pipe connection way points, hard pipe joint are flaring type, card sets of type and welding type three, hose connector is mainly withhold type hose connector.
Hydraulic system in the pipe and pipe connections also have different, pipe screwing end USES a threaded connection.Taper thread with their vertebral body tighten and using materials such as ptfe sealing operation, mainly used in low pressure in the hydraulic system.Fine thread sealing effect is very good, is often used in high pressure system, but it needs to use combination washer or o-rings for end face closed work, sometimes use copper washer, it is suitable for pipeline connection tube wall is thick, it consist of a joint body, takeover and nuts.When use, to embed the connector body target, cooperate to use the above will end face sealing gasket, joint with a rubber seal between body and take over, sometimes using spherical sealing manner.
Because the pipe joint is dismountable belongs to the connection of components, it is satisfying the normal connection solid, sealing capability, reasonable size, small pressure loss, good process performance requirements, and so on, the must also satisfy the requirement of dismantling is convenient.So don't look down upon it one by one small pipe joint, because only it can support the existence of the whole hydraulic system.
Hebei Jimeng Highstrength Flange-tubes Group Co.,Ltd.
Contact Person: Xuefeng Zhang
Address: North Circle Industrial Area of Mengcun County,Cangzhou,Hebei